Anti static wrist strap how to use

Here’s how to use anti-static wrist strap by bonding with PC case. First, Turn off the PC. Now turn the power switch on the power supply to “OFF” and disconnect the power cord. Press and hold the PC power button to drain any remaining power from the circuits.

This step is more important if you’ve used the PC recently. An anti - static wrist strap , also called an electrostatic discharge (ESD) wrist strap , is a safety device worn on your wrist that prevents the buildup of static electricity.

ESD straps are primarily used when working with electronic components. When properly worn, the highly conductive threads that make up the strap direct static electricity to a ground where it can be discharged safely. This protects the components from damage and keeps the wearer safe. Wear the anti static wrist strap with the metal touching your skin. Know where your grounding pin is located before attaching the alligator clip.

IMPORTANT: Depending on where you are located will be where the grounding pin is. The risk of being electrocuted is high if you are to play games in choosing the right pin. Next, attach the ground conductor to any metallic surface on the case or chassis.

Make sure that the surface you attach the ground conductor to is unpainted metal. You simply clip the anti static wrist strap to it and you are good to go. How to Properly Use an Anti-Static Wrist Strap You can wear the strap anywhere on your body, but most people choose to put the strap on their wrists. There will be a metal part on the strap, and this metal part should be touching your skin. If the metal isn’t touching your skin, you’ll need to readjust the strap.

An anti static wrist strap is worn by the user and in essence gives a way for a static discharge to leave you and safely discharge to the ground. The wrist strap is often a bright color, easily seen by others and a good visual reminder to the user. Attach the antistatic wrist strap around the wrist of your dominant hand or the hand that will present the work on the computer. Fasten the strap around your wrist.

The strap should be tight enough to prevent it from sliding but it should also fit comfortably. To be honest, unless you work on a wool carpet in a desert or other dry enviroment, static electricity is not a big worry. For optimum grounding, the clip should be attached to a painted section of the computer case. The strap’s anti-static properties will work attached to any part of the body, but it’s ideally suited to the wrist by design. Locate the alligator clip (toothed metallic clip with a spring-loaded caliper) that sits at the end of the cord attached to the strap and connect it to any non-painted metal part of the PC case.

Put the antistatic wrist strap around your wrist , making sure the metal is touching your skin. Secure the strap for a snug, yet comfortable fit. The metal should stay in constant contact with your skin so the ESD can be properly redirected.

Find the metallic clip, known as an alligator clip, located at the end of the wrist strap cord. At Home Repairs, demonstrate how to use an anti static wrist strap. Before you upgrade your computer, protect it from electrostatic discharge by using a wrist strap.

The inside of an anti static wrist strap is either silver-suffused nylon or metal-banded to capture static directly from your skin’s surface at a conductive rate. Anti - Static Wrist Strap. No parts specified. Step How to set up your Anti-static mat and wristband. Becuase the static electricity will be discharges through the grounded wire in the wrist band.

So it discharges over time rather than in one big shock to your componets. One tip: Wear the wrist band around your ankle if possible. It will make it easier to use your hands.

The anti - static wrist strip should not be attached to any grounded object. The alligator clip then connects to a Non painted metal surface of the case. If the resistance is extremely high (or as some meters measure, infinite), then the strap is broken.

Then any electrical static.